Purpose Surface Enhancement Deeply enhances surface tone and color contrast with matte finish - the extent is dependent on the surface Water Repelling, Salt Blocking Surface Protection Repels water and protects surface salt damage Features Deeply Enhancing Advanced Formula for Stone Deeply enhances surface tone while maintaining the natural look of natural stone Superior Surface Protection Provides a durable chemically bonded barrier against water and salt infiltration Water repellency inhibits biological growth such as mold, moss & algae Resists staining from oil, food and other contaminants High Performance Silane/Siloxane and Polymer Blend Does not contain any silicone or wax components Hybrid Penetrating & Film Forming Chemistry Excellent surface protection through sealer penetration and a protective layer Breathable, Immediate Application Will not trap naturally occurring efflorescence and/or moisture Can be applied on a new, clean and dry surface without waiting* (see Surface Preparation in application instructions) Apply two coats wet-on-wet for optimal performance Low VOC Water Based Sealer Environmentally friendly, EPA compliant LOW VOC formula Temperature Stable Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C) Ideal Applications
Manufactured and Natural Stone (containing quartz or other silicas) Horizontal and Vertical Surfaces - MUST TEST FIRST*
Concrete Wall Block
Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. Do not use on asphalt
PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of manufactured and natural stone this step is required to verify desired performance and appearance.
Additional Tools Needed Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer, slit foam roller, paint shield Coverage Per Gallon Natural Stone & Clay Pavers 200-400 square feet 18.6-37.1 square meters High Density Concrete & Pavers 200-300 square feet 18.6-27.9 square meters Low Density Concrete & Pavers 50-200 square feet 4.6-18.6 square meters
Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature.
For more info or questions regarding this product, please