Stain Blocking Surface Protection

• Blocks oil, organic & water staining which makes cleaning and maintenance easier

Engineered For Areas Frequently Exposed To Staining

• Guards against food, oil, organic & water stains

Extended Sealer Life Performance

• Durable & long lasting protection

Advanced Premium Fluorinated Urethane Chemistry

• Does not contain any silicone or wax components

Breathable, Immediate Application

• Will not trap naturally occurring efflorescence and/or moisture
• Can be applied on a new, clean and dry surface without waiting

Easy To Apply

• Apply two coats wet-on-wet for optimal performance

Invisible Penetrating Water Based Sealer

• Does not alter the appearance of the surface
• Non-film forming
• Consistency of water and milky white in appearance when applied. Dries transparent.
• Environmentally friendly, EPA compliant LOW VOC formula

Temperature Stable

• Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)

Driveways, Garage Floors, Outdoor kitchens, Industrial Flooring, Building Entrances, Shopping Malls, Food Courts, Restaurant Patios, Dumpster Pads

Any high use hardscape surface where aesthetic value and ease of maintenance are important.

Concrete

Stamped Concrete

Concrete Wall Block

Clay Pavers

Natural Stone

Manufactured Stone

Travertine

Exposed Aggregate

Grout

Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. Do not use on asphalt

PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.

• Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer
• Slit foam roller
• Paint shield

Pavers & Other Hardscape Surfaces

• 75-150 square feet
• 7 - 13.9 square meters

Concrete

• 115-175 square feet
• 10.7-16.3 square meters

Retaining Walls & Other Vertical Surfaces

• 75-150 square feet
• 7-13.9 square meters

Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation and complete coverage. Actual coverage may vary depending on the type, age, condition and porosity of the surface, application method and other local conditions such as temperature.

For more info or questions regarding this product, please contact us.